Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Variable Induction Control Actuator: Service and Repair
CHARGE MOTION CONTROL VALVE (CMCV)
Removal and Installation
1. Remove the intake manifold.
2. Disconnect the charge motion control valve (CMCV) RH and LH rods from the intake manifold.
3. Remove the stud bolt, the 2 bolts and the CMCV.
-
To install, tighten to 10 Nm (89 lb-in).
4. To install, reverse the removal procedure.
