Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
23. Disconnect the driver side safety canopy electrical connector.
24. Attach the restraint system diagnostic tool to the vehicle harness side of the driver side safety canopy electrical connector.
All vehicles
25. Install the RCM fuse F1.19 (10A) to the CJB.
26. Connect the battery ground cable.
Reactivation
All vehicle
1. Remove the RCM fuse F1.19 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
Vehicles with safety canopies
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy electrical connector.
4. Connect the driver side safety canopy electrical connector.
