Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
9. CAUTION: Inspect the rivet nut and A-pillar sheet metal for damage. Install a new rivet nut if necessary.
Position the bracket and install the bolt for the tether cord to the A-pillar.
10. Make sure the tether is securely engaged into the pin-type retainer and install the pin-type retainer to the A-pillar.
-
If a new safety canopy module was not installed, route the tether and securely engage it into the pin-type retainer at the A-pillar.
Vehicles with a moonroof
11. Route and connect the moonroof drain tube.
All vehicles
12. Connect the safety canopy electrical connector.