Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Seat Belt Retractor: Service and Repair
Front Safety Belt Retractor
FRONT SAFETY BELT RETRACTOR
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal and Installation
WARNING: All safety belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), shoulder belt height
adjusters (if so equipped) child safety seat tether attachments and attaching hardware should be inspected after any collision. All belt
assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Belt assemblies not in
use during a collision should also be inspected and replaced if either damage or incorrect operation is noted.
NOTE: The RH side is shown, the LH side is similar.
1. Remove the B-pillar trim panel.
2. Release the two pin-type retainers and the safety belt guide.
3. Remove the three bolts and the B-pillar trim panel bracket.