Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
6. NOTE: Make note of the wire harness routing for installation.
Remove the safety belt buckle and pretensioner electrical connectors from the seat cushion frame.
-
Disconnect the usage detection switch electrical connector.
-
Separate the safety belt buckle pretensioner electrical connector from the pin-type retainer.
7. NOTE: Make note of the wire harness routing for installation.
Remove the safety belt buckle and pretensioner.
1
Route out the safety belt buckle and pretensioner usage detection switch and pretensioner electrical connectors.
2
Remove the nut.
3
Remove the safety belt buckle and pretensioner.
Installation
1. Align the safety belt buckle and pretensioner anti-rotation tab to the seat bracket.
