Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
1. CAUTION: Always replace the J-clip retaining nut whenever installing a side impact sensor.
Align the locator tabs to the openings in the door.
2. CAUTION:
-
The ground wire must be placed between the bolt head and the sensor. Never position the ground wire between the J-clip retaining
nut and the sensor.
-
Always replace the J-clip retaining nut whenever installing a side impact sensor.
Install the side impact sensor.
1
Connect the electrical connector.
2
With the locator tabs aligned to the openings in the door, position the side impact sensor to the door.
3
Position the ground wire between the bolt head and the sensor.
4
Install the bolt.
3. Position back the weathershield.
4. Install the front interior door trim panel on the side with the affected side impact sensor.
5. Repower the system.