Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor-Front
Wheel Speed Sensor-Front
Removal and Installation
1. NOTE: If equipped, turn the air suspension switch to the OFF position.
With the vehicle in NEUTRAL, position it on a hoist
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the bolt and the retainers.
4. CAUTION: Do not allow the caliper to hang from the brake hose or damage to the hose can result.
Remove the bolts and position the caliper, pads and anchor plate aside.
