Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Tire Pressure Sensor: Service and Repair
Tire Pressure Sensor
Special Tool(s)
CAUTION: Use only special tool 204-354 anytime tire pressures are measured to be sure that accurate values are obtained.
CAUTION: Place the air chuck straight on the valve stem to inflate the tire. Do not cock the air chuck during the inflation cycle. Doing so can
damage the valve stem and cause air leaks.
CAUTION: Ford recommends using a round head air chuck on tire pressure sensors; it is not recommended to use air chucks with long shanks.
Doing so can cause tire pressure sensor valve stem damage and loss of tire pressure.
Removal
NOTE: The vehicle is equipped with a light blue-colored tire pressure sensor. When installing new components, use only this tire pressure sensor.
The Tire Pressure Monitoring System (TPMS) will not operate correctly if black-colored tire pressure sensors are installed.
1. Remove the wheel and tire assembly.