ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Steering Knuckle|Service and Repair|Page 7036 > < Tire Pressure Sensor|Service and Repair|Page 7031
Page 1
background image

Front Steering Knuckle: Service and Repair

Wheel Knuckle 

Removal and Installation

WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle.
This can be accomplished by turning off the air suspension switch located in the LH rear quarter trim panel. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
 

1. If equipped, turn the air suspension to the OFF position.
2. Remove the wheel hub. 

3. NOTE:  Use the hex holding feature to prevent the stud from turning while removing the nut.

Remove and discard the nut.

4. Remove the bolt and position the brake hose aside.

5. NOTE:  Use the hex holding feature to prevent the stud from turning while removing the nut.

Remove and discard the nut.

Front Steering Knuckle|Service and Repair|Page 7036 > < Tire Pressure Sensor|Service and Repair|Page 7031