ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Steering Pump to Steering Gear Pressure Line|Page 7066 > < Power Steering Pump to Steering Gear Pressure Line|Page 7064
Page 1
background image

Power Steering Line/Hose: Service and Repair
Power Steering Fluid Cooler to Power Steering Fluid Reservoir Return Hose

Power Steering Fluid Cooler to Power Steering Fluid Reservoir Return Hose 

Material 

Removal and Installation

CAUTION:  While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power
steering components can result.

All vehicles

1. WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension

vehicle. This can be accomplished by turning off the air suspension switch located near the jack storage area in the rear of the passenger
compartment. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle
during these operations. Failure to follow these instructions may result in personal injury.
 

Turn the air suspension switch to the OFF position, if equipped.

2. With the vehicle in NEUTRAL, position the vehicle on a hoist. 

Early build vehicles 

3. Remove the 3 reservoir bolts.

4. Disconnect the clamp and remove the return line.

^

Allow the fluid to drain into a suitable container.

Power Steering Pump to Steering Gear Pressure Line|Page 7066 > < Power Steering Pump to Steering Gear Pressure Line|Page 7064