Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
12. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
13. While pushing in on the two glove compartment door tabs, position the glove compartment downward.
14. NOTE: The Expedition is shown, the Navigator is similar.
Through the glove compartment opening, release the tab and disconnect the passenger air bag module electrical connector.
15. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
Vehicles without safety canopies
16. CAUTION: Do not deactivate the safety canopy module circuit by removing the safety canopy bridge resistor from the safety canopy
electrical connector.