Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
6. Disconnect the lines from the frame rail retainers.
7. CAUTION: Do not allow the intermediate shaft to rotate while it is disconnected from the gear or damage to the clockspring can occur. If there is
evidence that the intermediate shaft has rotated, the clockspring must be removed and recentered.
Remove the intermediate shaft-to-gear pinch bolt and disconnect the intermediate shaft from the gear.
8. Remove the steering line clamp plate bolt and disconnect the power steering lines.
^
Position the lines aside.
^
Discard the O-ring seals.
Navigator vehicles
9. Disconnect the electrical connector.
^
Rotate the actuator until the connector housing is facing the steering gear input shaft.
