ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Control Arm|Front|Page 7199 > < Control Arm|Front|Page 7197
Page 1
background image

Control Arm: Service and Repair
Rear

Lower

Lower Arm 

WARNING:  The electrical power to the air suspension system, must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the LH rear quarter trim panel. Failure to do so can
result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
 

1. If equipped, turn the air suspension switch to the OFF position.
2. Remove the wheel and tire assembly. 

3. NOTE:  Use the hex holding feature to prevent the stud from turning while removing the nut.

Remove and discard the nut.

4. Remove the bolt and flag nut.

^

Discard the flag nut.

5. Remove the nut and bolt.

^

Discard the nut.

Control Arm|Front|Page 7199 > < Control Arm|Front|Page 7197