Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
6. Remove the nut and bolt.
^
Discard the nut.
7. Remove the three bolts.
8. NOTE: Use the hex holding feature to prevent the stud from turning while removing the nut.
Remove and discard the nut.
9. NOTE: Use the hex holding feature to prevent the stud from turning while removing the nut.
NOTE: To separate the ball joint from the wheel knuckle, loosely install the nut and then tap on the end of the stud.
Remove the nut and the wheel knuckle.
^
Discard the nut.
