Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Suspension Control Module: Service and Repair
Air Suspension Control Module
Removal and Installation
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. NOTE: The air suspension control module is mounted to the lower left side of the dash above the parking brake control.
Disconnect the electrical connectors.
3. Pull back the dash padding to expose the module mounting nuts.
4. Remove the air suspension control module nuts.
5. NOTE: The air suspension control module is calibrated with information from the ride height sensor. A new or exchanged air suspension control
module requires that the ride height adjustment calibration and pneumatic test be carried out.
To install, reverse the removal procedure.