Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
6. If the bracket will be discarded, remove the air compressor from the bracket.
^
Remove and discard the three screws and washers.
^
Remove and discard the three rubber isolators from the air compressor.
^
Remove and discard the silencer (muffler) retaining screws and remove the silencer from the bracket.
7. NOTE: When installing the air lines, make sure the white air line is fully inserted into the fitting for correct installation.
To install, reverse the removal procedure.
^
NOTE: Make sure that there are no objects trapped under or on the bracket.
Make sure that the air compressor is not in contact with any surrounding components that could cause vibration noises.
NOTE: Make sure that the air compressor moves freely in the rubber isolators.
Make sure that the bracket has no deformations that could cause the three rubber isolators to load against each other.
If installing a new bracket from the kit, only use the new fasteners supplied as instructed.
