ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Automatic Transmission - 6HP26|Page 5470 > < Automatic Transmission - 6HP26
Page 2
background image

2. Remove the fluid pan drain plug and allow the fluid to drain.

Refill 

1. Install the fluid pan drain plug.

^

Tighten to 8 Nm (71 inch lbs.).

2. Remove the fluid fill plug located on the RH rear side of the case, near the transmission electrical connector.

3. CAUTION:  The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or

transmission failure.

Fill the transmission.
^

Add 4.7 liters (5 quarts) of clean automatic transmission fluid to the transmission through the fluid fill hole. Stop when the fluid runs out of
the bottom of the hole.

Automatic Transmission - 6HP26|Page 5470 > < Automatic Transmission - 6HP26