Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
3
Backer ring.
4
Band seal.
7. NOTE: Inspect the case to make sure that the old band seals and backer rings are not stuck in the case.
NOTE: Install new band seals and backer rings on the ends of the cooler lines prior to installing.
Position the fluid cooler lines into the transmission, then install the bolt for the transmission cooler line retainer.
8. Install the transmission fluid cooler tube retainer to the side of the transmission.
9. Install the transmission fluid cooler tube retainer to the front of the engine.
10. Connect the fluid cooler tubes into the auxiliary transmission fluid cooler.
