Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
8. Install new O-rings on the outer shell of the bulkhead electrical connector.
9. CAUTION: Do not touch the electrical connector pins. Electrostatic charge may occur and will cause damage to the mechatronic unit.
With the release tab down, push the outer shell of the bulkhead electrical connector into the transmission.
10. Press up on the tab and lock the outer shell of the bulkhead electrical connector in place.
11. Install the transmission fluid pan. Tighten the bolts in a crisscross pattern.
