Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
12. Install the shift cable bracket bolts and connect the shift cable end.
13. Connect the main transmission electrical harness by pushing it in and twisting the outer shell to lock it in place.
14. Remove the fluid fill plug.
^
The fill plug is located on the RH rear side of the case near the transmission electrical connector.
15. CAUTION: The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or
transmission failure.
Fill the transmission.
^
Add 4.7 liters (5 quarts) of clean automatic transmission fluid to the transmission through the fluid fill hole. Stop when the fluid runs out of
the bottom of the hole.
