Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
5. Remove the snap rings from the universal joint.
6. NOTE: If necessary, use a pair of pliers to remove a bearing cup if it cannot be pressed out all the way.
Remove the driveshaft flange yoke.
1
Position the driveshaft flange in the special tool.
2
Press out the bearing cup.
3
Rotate the driveshaft flange yoke.
4
Press on the spider to remove the remaining bearing cup.
5
Remove the driveshaft flange yoke.
7. Repeat the previous step to remove the remaining bearing cups and spider from the driveshaft.
8. Clean the yoke area at the end of the driveshaft and flange yoke.
Assembly
NOTE: Universal joint service kits are to be installed as complete assemblies only. Do not use components from other universal joints.
1. Clamp the special tool in a vise.