Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Front Door Window Motor: Service and Repair
Front Door Window Regulator Motor
FRONT DOOR WINDOW REGULATOR MOTOR
Removal and Installation
1. Remove the front door trim panel.
2. Position the front door weathershield aside.
3. NOTE: Use a flat-blade screwdriver between the window regulator motor and window regulator assembly to hold the window regulator assembly
drum in place.
Remove the bolts and the front door window regulator motor.
1
Disconnect the electrical connector.
2
Remove the bolts.
4. To install, reverse the removal procedure.
-
Cycle the window glass to make sure the gears engage.
