Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Rear Door Window Motor: Service and Repair
REAR DOOR WINDOW REGULATOR MOTOR
Removal and Installation
1. Remove the rear door trim panel.
2. Position the rear door weathershield aside.
3. NOTE: Use a flat-blade screwdriver between the window regulator motor and the window regulator assembly to hold the window regulator
assembly drum in place.
Remove the rear door window regulator motor.
1
Disconnect the electrical connector.
2
Remove the bolts.
4. To install, reverse the removal procedure.
-
Cycle the door glass to make sure of gear engagement.
