Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Liftgate Window Glass: Service and Repair
LIFTGATE WINDOW GLASS
Removal and Installation
1. Remove the rear window wiper motor.
2. Disconnect the rear window defrost electrical connectors.
3. CAUTION:
-
The liftgate glass must be supported when removing and installing the liftgate assist cylinders.
-
Do not extend the socket clips more than 2.0 mm (0.08 in) or failure of the socket can occur
Disconnect the two liftgate glass assist cylinders.
1
Insert a screwdriver blade under the socket clip and lift.
2
Gently pull the socket off the ball stud.
4. Remove the liftgate glass hinge bolts and remove the glass.
-
Apply High Strength Threadlocker to the liftgate glass hinge bolts during installation.
5. To install, reverse the removal procedure.