Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
Rear Door Window Regulator: Service and Repair
REAR DOOR WINDOW REGULATOR
Removal and Installation
1. Remove the rear door trim panel.
2. Remove the rear door speaker.
1
Remove the screws.
2
Disconnect the electrical connector.
3
Remove the speaker.
3. Remove the rear door weathershield.
4. Connect the window control switch.
5. Lower the window glass to access the two window glass-to-regulator bolts.
6. Disconnect the window control switch.
7. Remove the window glass-to-regulator bolts and rear door window glass.
8. NOTE: Secure the rear window glass in the full up position.
Secure the rear window glass with tape to the front door frame.
