Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
10. CAUTION:
-
Do not drive the vehicle after installing windshield glass until the urethane adhesive has cured. Inadequate curing of the urethane
adhesive adversely affects the strength of the urethane adhesive bond.
-
If using Urethane Adhesive Essex 400-HV, the curing time at temperatures above 13°C (55°F) and relative humidity above 50% is
12-24 hours. Curing time decreases at higher temperatures and/or lower humidities.
Apply a bead of Urethane Adhesive Essex 400-HV meeting Ford specification WSB-M2G316-B to the pinch weld just outside the foam butyl dam
over the top of the existing urethane bed.
11. CAUTION: Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.
Using the alignment marks, install the windshield glass.
12. Install the windshield side mouldings.
NOTE: Be sure the moldings seat completely.
13. Install the headliner.
14. Install the interior rear view mirror.
15. Install the overhead console.
