Expedition 4WD V8-5.4L SOHC VIN L (2000)
4. Install the tie rod end castle nut.
1. Position the tie rod end.
2. Install the tie rod end castle nut.
3. Install a new cotter pin.
5. Position the anti-lock sensor wire.
-
Install the front brake anti-lock sensor wire bracket bolt.
6. Load the torsion bar.
1. Install the torsion bar adjuster.
-
Turn the torsion bar adjuster until the reference marks align.
2. Install the Torsion Bar Tool with the Torsion Bar Tool Adapters in the B slots on the Torsion Bar Tool.
3. Tighten the Torsion Bar Tool to load the torsion bar.
4. Install the torsion bar adjuster nut.
5. Install the torsion bar adjuster bolt.
6. Remove the Torsion Bar Tool.
7. Install the wheel hub.
8. Adjust the ride height.
