Expedition 4WD V8-5.4L VIN 5 (2006)
2. Remove the rear door speaker.
1
Remove the screws.
2
Disconnect the electrical connector.
3
Remove the speaker.
3. Remove the rear door weathershield.
4. Connect the window control switch.
5. Lower the window glass to access the 2 window glass-to-regulator bolts.
6. Disconnect the window control switch.
7. Remove the window glass-to-regulator bolts and rear door window glass.
-
To install, tighten to 11 Nm (8 lb-ft).
8. NOTE: Secure the rear window glass in the full UP position.
Secure the rear window glass with tape to the front door frame.
