Expedition 4WD V8-5.4L VIN 5 (2006)
Arm Rest: Service and Repair
SEAT ARMREST - SECOND ROW
Removal and Installation
1. To access the armrest locking metal clip, pull the armrest material back on the top side of the armrest for access to the release clip.
2. CAUTION: To remove armrests, do not pull them off with force. The locking metal clip will be damaged and a new armrest will need to
be installed.
NOTE: Armrest removed to show detail of release button mechanism.
Use a tool such as a flat-bladed screwdriver to push the release button at the hinge point. The clip will release and the armrest will slide off the pin.
3. CAUTION: To install armrests, do not push them on with force. The locking metal clip will be damaged and a new armrest will need to
be installed.
To install, reverse the removal procedure.
-
To install the armrest, push the release button and slide the armrest on the pin.