Expedition 4WD V8-5.4L VIN 5 (2006)
Trim Panel: Service and Repair
C-Pillar Trim Panel
C-PILLAR TRIM PANEL
Removal and Installation
NOTE: Right side shown, left side similar.
1. NOTE:
-
Position the shoulder safety belt guide to the lowest position.
-
Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or the cover does not remain closed,
install a new shoulder safety belt guide cover.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt cover up.
2
Remove the safety belt guide nut.
-
To install, tighten to 40 Nm (30 lb-ft).
3
Remove the shoulder safety belt guide.
2. Remove the C-pillar trim panel.
1
Remove the bolt cover and bolt.
-
To install, tighten to 8 Nm (71 lb-in).
2
Remove the C-pillar trim panel by pulling outward to release the retainers.
3. To install, reverse the removal procedure.
