Expedition 4WD V8-5.4L VIN 5 (2006)
7. Remove the 3 pin-type retainers from the seat bottom cover (2 shown).
8. Release the 2 J-clips for the bottom cover.
9. Remove the 4 pin-type retainers from the sides of bottom cover (2 shown).
10. Remove the bottom cover.
11. Remove the bolt and the safety belt buckle.
-
To aid installation, note the location of locating tab.
-
To install, tighten to 40 Nm (30 lb-ft).
12. To assemble, reverse the disassembly procedure.
Rear Seat Cushion - Second Row, 20 Percent
REAR SEAT CUSHION - SECOND ROW, 20 PERCENT
