ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 6856 > < Electronic Brake Control Module|Locations|Page 6852
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Service and Repair

Hydraulic Control Unit (HCU)

Material

Removal and Installation

WARNING:  Use of any other than approved DOT 3 motor vehicle brake fluid will cause permanent damage to brake components and will
render the brakes inoperative. Failure to follow these instructions may result in personal injury.

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

1. CAUTION:  Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

Disconnect the battery ground cable. For additional information, refer to Battery.

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 6856 > < Electronic Brake Control Module|Locations|Page 6852