Expedition 4WD V8-5.4L VIN 5 (2006)
1. Release the plunger lock (if equipped).
-
Turn the lock knob counterclockwise until the first click is felt.
2. Fully apply the brake pedal
3. Install the speed control deactivator switch.
1
Position the deactivator switch in the bracket and rotate it clockwise 45 degrees.
2
Connect the electrical connector.
Vehicles equipped with a locking tab
4. NOTE: There should be an extra click heard when tugging on the brake pedal.
Slowly release the brake pedal and tug it moderately once the pedal reaches the rest position.
