Expedition 4WD V8-5.4L VIN 5 (2006)
Scribe a location mark on the timing chain and the camshaft phaser and sprocket assembly.
12. NOTICE: Remove the front thrust camshaft bearing cap straight upward from the bearing towers or the bearing cap may be damaged from side
loading.
Remove the 2 bolts and the LH cylinder head camshaft front bearing cap.
13. NOTICE: The camshaft bearing caps must be installed in their original locations. Record camshaft bearing cap locations. Failure to follow these
instructions may result in engine damage.
Remove the remaining bolts in the sequence shown and remove the LH cylinder head camshaft bearing caps.
