Expedition 4WD V8-5.4L VIN 5 (2006)
All vehicles
4. Lower the engine into position.
5. CAUTION: Only use hand tools when removing the LH engine mount through bolt or damage to the cage nut can occur.
NOTE: If the LH engine mount through bolt nut is missing or damaged install a new nut using service part number W709375. If the LH engine
mount through bolt nut cage is damaged or missing, remove the cage and install a new nut using service part number W520516-S301.
Install the LH engine support insulator bolt.
^
Tighten to 175 Nm (129 ft. lbs.).
6. CAUTION: Only use hand tools when installing the RH engine mount nut or damage to the engine mount can occur.
Install the RH engine mount nut.
^
Tighten to 175 Nm (129 ft. lbs.).
7. CAUTION: Only use hand tools when installing the transmission mount-to-crossmember nuts or damage to the transmission mount can occur.
Install the transmission mount-to-crossmember nuts.
^
Tighten to 103 Nm (76 ft. lbs.).
