Expedition 4WD V8-5.4L VIN 5 (2006)
6. Using the special tool, remove and discard the crankshaft front seal.
Installation
1. Lubricate the engine front cover and the new crankshaft front seal inner lip with clean engine oil.
2. Using the special tools, install the new crankshaft front seal.
3. NOTE: If not secured within 4 minutes, the sealant must be removed and the sealing area cleaned with metal surface prep and silicone gasket
remover. Follow the directions on the packaging. Allow to dry until there is no sign of wetness, or 4 minutes, whichever is longer. Failure to
follow this procedure can cause future oil leakage.
Apply silicone gasket and sealant to the Woodruff key slot in the crankshaft pulley.
