Expedition 4WD V8-5.4L VIN 5 (2006)
19. Remove the RH camshaft.
20. CAUTION: Remove the front thrust camshaft bearing cap straight upward from the bearing towers or the bearing cap may be damaged from
sideloading.
Remove the 2 bolts and the LH cylinder head camshaft bearing cap.
21. NOTICE: The camshaft bearing caps must be installed in their original locations. Record camshaft bearing cap locations. Failure to follow these
instructions may result in engine damage.
Remove the remaining 8 bolts in the sequence shown and remove the LH cylinder head camshaft bearing caps.
22. Clean and inspect the LH camshaft bearing caps.
The camshaft front thrust bearing cap contains an oil metering groove. Make sure the groove is free of foreign material.
23. Remove the LH camshaft.
24. CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into the
original locations. Failure to follow these instructions may result in engine damage.
