ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Restraints - Cannot Disable 'Belt Minder' Chime|Page 11140 > < Cruise Control Switch|Service and Repair|Page 11130
Page 1
background image

Audible Warning Device: Customer Interest
Restraints - Cannot Disable 'Belt Minder' Chime

TSB 05-22-17

11/14/05

INABILITY TO DISABLE THE SUPPLEMENTAL 
SAFETY BELT WARNING CHIME (BELTMINDER)

FORD:
2006 Expedition

LINCOLN:
2006 Navigator

ISSUE
Some 2006 Expedition/Navigator vehicles may exhibit an inability to disable the Belt Minder function following procedures listed in the Workshop
Manual or the Owner Guide. The Belt Minder function operates normally, but can not be turned off (if desired by the customer).

ACTION
Replace the restraint control module (RCM), which includes software to disable the Belt Minder. Refer to Workshop Manual, Section 501-20B to
replace the RCM. Then follow Workshop Manual, Section 413-09 or the Owner Guide procedure to disable the Belt Minder function.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage

OPERATION

DESCRIPTION

TIME

052217A

2006 Expedition: Replace

1.0 Hrs.

The Restraints Control
Module Includes Time To
Depower And Repower
The Supplemental
Restraints System And
Disable The Beltminder
(Do Not Use With 14056D,
14056D1B, 14056D1C,
14056D1XN, 14056DZR)

052217A

2006 Navigator: Replace

1.2 Hrs.

The Restraints Control
Module Includes Time To
Depower And Repower
The Supplemental
Restraints System And
Disable The Beltminder
(Do Not Use With 14056D,
14056D1B, 14056D1C,
14056D1XN, 14056DZR)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

14B321

42

OASIS CODES: 104000, 206000

Restraints - Cannot Disable 'Belt Minder' Chime|Page 11140 > < Cruise Control Switch|Service and Repair|Page 11130