Expedition 4WD V8-5.4L VIN 5 (2006)
-
Tighten to 5 Nm (44 lb-in).
8. Tighten the middle auxiliary evaporator line fittings.
9. Inspect the auxiliary evaporator lines for correct installation. Loosen, reposition and tighten as needed.
10. Install the heat shield and the bolts.
-
Tighten to 15 Nm (11 lb-ft).
11. Install the heat shield and the bolts.
-
Tighten to 15 Nm (11 lb-ft).
12. Install the RH catalytic converter.
13. Install the muffler.
14. Partially lower the vehicle.
