ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Vehicle Lifting|Description and Operation|Page 3080 > < Wheel Fastener|Specifications|Page 3076
Page 1
background image

Vehicle Lifting: Description and Operation

JACKING

WARNING:

-

The electrical power to the air suspension system must be shut down prior to hoisting, jacking or towing an air suspension vehicle. This
can be accomplished by turning off the air suspension switch located in the LH rear quarter trim panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.

-

Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move.

-

Support the vehicle prior to carrying out any procedure requiring the vehicle to be jacked off the ground.

-

Make sure the jack and jack stands are correctly located to prevent the vehicle from falling.

-

Wheel chocks should be used to prevent the vehicle from rolling and falling off the jack.

CAUTION:

-

Never use a halfshaft as a lifting point.

-

If equipped with retractable running board, disable the system through the instrument cluster controls.

Jacking Points - Front

Jacking Points - Front

The front jacking point is indicated by an arrow cutout in the frame, located behind the front tire and wheel assembly.

Jacking Points - Rear

Vehicle Lifting|Description and Operation|Page 3080 > < Wheel Fastener|Specifications|Page 3076