Expedition 4WD V8-5.4L VIN 5 (2006)
19. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger side safety canopy electrical connector.
20. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide cover.
Remove the second row driver side safety belt guide.
1
Release the retaining tab at each side and open the safety belt guide cover.
2
Remove the nut.
3
Remove the second row driver side safety belt guide.
21. Remove the driver side C-pillar trim panel.
1
Separate the weather-stripping along the driver side C-pillar trim panel.
2
Remove the bolt cover and bolt.
3
Pull out to release the retainers and remove the driver side C-pillar trim panel.
22. Disconnect the driver side safety canopy electrical connector.