Expedition 4WD V8-5.4L VIN 5 (2006)
1. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the power steering pump pulley.
2. Remove the air cleaner intake pipe.
3. Using the special tool, remove the power steering pump pulley.
Installation
1. CAUTION: If the pulley has been removed and installed twice, install a new power steering pump pulley.
Using the special tool, install the power steering pump pulley.
^
Inspect the pulley for paint marks in the web area near the hub. If there are 2 paint marks, install a new pulley. If there is 1 paint mark or none
at all, use a paint pencil to mark the web area of the pulley near the hub.
2. Install the air cleaner intake pipe.
3. Rotate the accessory drive belt tensioner clockwise and install the accessory drive belt to the power steering pump pulley.
