Expedition 4WD V8-5.4L VIN 5 (2006)
Suspension Control Module: Service and Repair
Air Suspension Control Module
Removal and Installation
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. NOTE: The air suspension control module is mounted to the lower left side of the dash above the parking brake control.
Disconnect the 2 air suspension control module electrical connectors.
3. Pull back the dash padding to expose the 2 module bracket nuts.
4. Remove the air suspension control module nuts and the air suspension control module.
^
To install, tighten to 8 Nm (71 inch lbs.).