ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Shock Absorber - Front|Page 8300 > < Air Shock Absorber - Front
Page 2
background image

Removal and Installation 

WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle.
This can be accomplished by turning off the air suspension switch located in the LH rear quarter trim panel. Failure to do so may result in
unexpected inflation or deflation of the air springs, which may result in shifting of the vehicle during these operations. Failure to follow these
instructions may result in personal injury.
 

WARNING:  Do not remove an air spring under any circumstances when there is pressure in the air spring. Do not remove any components
supporting an air spring without either exhausting the air or providing support for the air spring. Failure to follow these instructions may

Air Shock Absorber - Front|Page 8300 > < Air Shock Absorber - Front