Expedition 4WD V8-5.4L VIN 5 (2006)
Installation
1. Position the new wheel stud in the wheel bearing and hub assembly, aligning the serrations in the wheel hub flange made by the original wheel
stud.
2. CAUTION: Do not use power tools to install the wheel stud. The serrations on the flange can be stripped.
NOTE: Do not use the wheel nut that came with the vehicle.
Install 4 washers and a wheel nut on the wheel stud and tighten the wheel nut until the stud seats against the flange.
3. Remove the wheel nut and washers.
^
Discard the wheel nut.
4. Install the wheel bearing and wheel hub assembly.
