Expedition 4WD V8-5.4L VIN 5 (2006)
6. Install the transmission fluid cooler tube retainer to the front of the engine.
^
Tighten to 25 Nm (18 ft. lbs.).
7. Connect the transmission fluid cooler tubes to the thermostatic valve.
^
Tighten to 20 Nm (15 ft. lbs.).
8. Connect the transmission fluid cooler tubes to the transmission.
^
Tighten to 20 Nm (15 ft. lbs.).
9. Fill the transmission with the specified type and quantity of transmission fluid.
10. Check for leaks.