ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

6HP26 Automatic Transmission|Page 5711 > < 6HP26 Automatic Transmission|Page 5709
Page 5
background image

With the engine still running and the vehicle in PARK, remove the fluid fill plug. The fill plug is located on the RH rear side of the case near the
transmission electrical connector.

13. CAUTION:  The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or

transmission failure.

Fill the transmission.
^

Add clean automatic transmission fluid to the transmission through the fluid fill hole. Stop when the fluid runs out of the bottom of the hole.

14. Install the fluid fill plug.

^

Tighten to 35 Nm (26 ft. lbs.).

15. With the engine still running in PARK, check the fluid level. If more fluid is needed, remove the fluid fill plug and fill with clean automatic

transmission fluid until the fluid runs out of the bottom of the hole.

6HP26 Automatic Transmission|Page 5711 > < 6HP26 Automatic Transmission|Page 5709