ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

6HP26 Automatic Transmission|Page 6048 > < 6HP26 Automatic Transmission|Page 6046
Page 4
background image

5. CAUTION:  The fluid fill plug located on the side of the transmission is near the exhaust system. The exhaust will be extremely hot during this

procedure. Use care when working near the exhaust and the heat shields.

Remove the fluid fill plug located on the RH rear side of the case near the transmission electrical connector.

6. CAUTION:  The use of any other transmission fluid can result in the transmission failing to operate in a normal manner or transmission failure.

CAUTION:  The fluid fill plug located on the side of the transmission is near the exhaust system. The exhaust will be extremely hot during this
procedure. Use care when working near the exhaust and the heat shields.

Fill the transmission.
^

Add clean automatic transmission fluid to the transmission through the fluid fill hole.

^

Stop when the fluid runs out of the bottom of the hole.

7. CAUTION:  The fluid fill plug located on the side of the transmission is near the exhaust system. The exhaust will be extremely hot during this

procedure. Use care when working near the exhaust and the heat shields.

Install the fluid fill plug.
^

Tighten to 35 Nm (26 ft. lbs.).

8. Move the transmission range selector lever through all the gear ranges, checking for engagements.

6HP26 Automatic Transmission|Page 6048 > < 6HP26 Automatic Transmission|Page 6046