Expedition 4WD V8-5.4L VIN 5 (2006)
3. CAUTION:
-
The liftgate glass must be supported when removing and installing the liftgate assist cylinders.
-
Do not extend the socket clips more than 2.0 mm (0.08 in) or failure of the socket can occur.
Disconnect the 2 liftgate glass assist cylinders.
1
Insert a screwdriver blade under the socket clip and lift.
2
Gently pull the socket off the ball stud.
Window glass assembly or hinge assembly
4. Remove the liftgate glass hinge-to-body fasteners and remove the glass.
-
To install, tighten to 12 Nm (9 lb-ft).
Window hinge assembly
5. Remove the liftgate glass to hinge fasteners and remove the glass.
-
Apply Threadlock 262 to the liftgate glass to hinge fasteners during installation.
-
To install, tighten to 8 Nm (71 lb-in).
Window glass assembly or window hinge assembly
6. To install, reverse the removal procedure.