Expedition 4WD V8-5.4L VIN 5 (2006)
Windshield Washer Pump: Service and Repair
WINDSHIELD WASHER PUMP AND RESERVOIR
Removal and Installation
1. Disconnect the electrical connectors.
2. Remove the windshield washer reservoir screws.
-
To install, tighten to 5 Nm (44 lb-in).
3. NOTE: Windshield washer fluid should be collected in a container after the windshield washer hoses are disconnected.
Disconnect the windshield washer hoses.
4. Remove the windshield washer reservoir.